You read the reviews of best car battery charger, but you have no idea how to jump start your car. This seems to be a hard part (for you and other new car owners) that you cannot know how to connect the jumper cables or even if a true car jump starter. Well, you are lucky to find this article because I will show you how to play this game.
Identify kinds of jump starters first
With several jumper cables, you just need to recognize 2 main cables with clamps. Jumper cables provide you with a rapid means of running a car with a dead battery. Be sure to check the user manual for your car in any specific instruction on jump-starting the car safely.
Portable jump starter
A portable jump starter can transfer a jolt of electricity to the battery of your vehicle when you are trying to run it.
It gives the drained battery the necessary needs to start your car. These jump starters can keep power like a battery charger which will need to be charged before using. You do not have to take a second vehicle to use this device to jump-start a car.
A trickle charger will enter a wall outlet and move power to a battery in a long period of time. This is truly different than the quick jolt of power a portable jump starter delivers.
With a trickle charger only, you are keeping the battery at a high amount of charging level. This will start your car when necessary. For instance, you probably hold a battery on a trickle charger overnight when the temperature is so cold.
How to select a car jump starter
Pay attention to the jump starters
You should bring a set of jumper cables in your car at any time because your car may get stuff on a highway. It is not a fun game to play when you must face this situation! You know, any kind of set will do a better job. Deeply, you should find out cables gauge from 4 to 6 in size along with a length around 20 feet.
Most cables of that size should be more durable to work with flexibility in case your vehicle cannot add a more suitable jumper cable. Do not assume that a good cable has a long product because the distance electricity probably decreases the strength of the battery charger for a while.
Look for a power source
You will need to find the parking lot to charge your battery. It is greater if the park has a power source for your car. Thus, seek the place for locating the battery and where you should charge the car battery.
In general, batteries are placed on the engine box or in the front. Sometimes, they can be concealed by plastic covers which required to be gotten rid of before jumping. Some batteries could be found in the trunk or under the rear seat. Be sure to clearly know the exact position of your car battery charger before you need to jump a car.
Run the jumper cables
When the running vehicle is available in the right position, turn it off and open hoods at once. It is time to set the jumper cables.
Once you control the jumper cables, be sure to keep the redpoint (positive) and the black clamps (negative) from catching each other. When electricity begins flowing via the cables, this will make sparks and possibly lead to a short circuit in one or both vehicles.
The clamps can connect to battery terminals which are supposed metal nodes with wires linked to them.
Before connecting all cables, you should ensure to remove dirt or grime to get a smooth connection. Identify which terminal is positive and which point is negative. You will particularly figure out each symbol on the battery itself (near the terminal).
Sometimes, the positive is quite difficult to see because it is hidden under a recover. Ask for help when you are not sure how to connect. By doing this, you will not spend lots of bucks to repair it.
Moreover, you enable to connect to the red clamps to the positive terminal of the dead battery. Then, you probably link to the other red clamps in the live battery of the positive terminal. Thereafter, you could connect a black clamp to the negative terminal of the live battery.
You do not have to connect the second black to the negative terminal on the dead battery. You need to look for an unpainted metal surface on your car and connect it, This will help a safer jumping.
Run your engines
Start the functioning of your car in advance. Then, you should run the dead vehicle. If the lights turn on and you hear a cracking sound (but it will not start), you should have another problem. This means you get a bad starter.
Using a multi-meter is a good idea to check your battery charger. It has various types of vehicle categories, but it should range around 12 volts when your car is closed. If your battery has a good condition, this will get other troubles.
In case your vehicle and your jump were successful, leave the car running when you disconnect the cables. Do not let the clamps touch together. At the same time, you should keep your car running till you have met your destination. This is because it will provide an ample time to recharge to avoid a drained battery.